IR control problems are becoming more common as it is often desirable to hide AV equipment away in cabinets or other rooms, often a distance from the TV or projector. The IRBKIT system makes it easy to relay those important IR signals back to where they are needed.
The IRBKIT system is designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.
IRBKIT WITH FASCIA MOUNT IR RECEIVER
This page that you are on now shows our IRBKIT distribution amplfier with our really popular Fascia mount IR receiver. This is ideal if you have a black fascia screen and would like a discreet solution to attach to the front (it only measures 34mm long x 15mm wide x 9mm deep). The Fascia mount IR receiver attaches by small sticky pads and has a small green LED which flashes to show that it has received your remote control's command. A handy cable clip is also supplied to hold the receiver's cable out of the way behind the screen.
The IR receiver cable is 2.5 metres long and so fine for most local installations. This cable can be easily extended over Cat5e/6 using our KA175 line adaptors.
* Please note that if you require more than one IR receiver input then we recommend the IRPKIT4 or the IR Commander Matrix.
1 x IRBKIT IR distribution amplifier
1 x PSU with 3 pin UK plug
1 x IRFMR Fascia mount IR receiver fitted with a captive 2.5 metre cable
2 x IRBW1 Close range IR emitter wands
1 x Instruction sheet
IR inputs: 1
IR outputs: 5 (4 x standard power, 1 x high power)
Power requirement: 12v 500mAh
Dimensions of IRBKIT: L 104mm x W 72mm x D 32mm
Dimensions of IR receiver: L 34mm x W 15mm x D 9mm
Dimensions of emitter: L x 15mm x W 8mm x D 6mm.
Have a look at the instruction sheet:
Helpful installation info
IR receivers and Emitter connection diagrams (Acrobat pdf file)